Other makes logos on request.

Choice of logo (specify) can be cut into the design if we have it on the system. Custom logos can be scanned at a small extra cost.

The protector can also be produced in different sizes from above (pricing to suit if massively different), please enquire.

3M Di-Noc 'real' carbon vnyl - suitable for the Suzuki GSX1250 / 650F and 650F Bandit - 9 pieces!  This is a ridged vinyl that will last 10 times longer than the other printed vinyl but is of course more expensive.

Made from carbon fibre vinyl (which is very expensive per metre), these decals help to enhance the large spaces found on the sprocket cover casing.

They come in 4 seperate pieces and don't have a backing tape on as its best to peel them off and apply the film 'manually' so you can position them correctly. Make sure the surface is clean and free from dust - likewise your fingers as you don't want grease to lessen the effect of the adhesive.

The engine casing decals are made from carbon fibre vinyl too and these decals help to enhance the large spaces found on the casings.

The 'S' shown on the round decal is cut into the circle so will show silver when applied to the casing. It also comes with a same size 'S' in red in case you wish to have a different colour option.

The GSX650F logo comes in silver 

Made from 3M Di-Noc carbon fibre vinyl (which is very expensive per metre), these decals help to enhance the large spaces found on the engine casings.

The 'S' shown on the other casing is cut into the decal so will show silver when applied to the casing. It also comes with a same size 'S' in red in case you wish to have a different colour option.

The GSX650F logo comes in silver and red. Please note the decal comes seperately so you can position it how you wish.

All decals are completely heat proof as they have been tested on my own bike and have not shown any signs of melting, discolouration or peeling - so I know they are OK!

Other colours available at same cost - just ask. Please note that signmaking vinyl is generally just a few microns thick and will last many years in normal conditions. Please don't expect real carbon fibre like some idiot did - its vinyl

Suitable for the Suzuki GSX1250 / 650F and 650 Bandit.

Made from 3M Di-Noc 'real' carbon fibre vinyl (which is very expensive per metre), these decals help to enhance the large spaces found on the sprocket cover casing.

These come in 4 seperate pieces and don't have a backing tape on as its best to peel them off and apply the film 'manually' so you can position them correctly. Make sure the surface is clean and free from dust - likewise your fingers as you don't want grease to lessen the effect of the adhesive.

All decals are completely heat proof (even though the sprocket cover doesn't get that hot) as they have been tested on my own bike and have not shown any signs of melting, discolouration or peeling - so I know they are OK!

Other colours available at lesser cost - just ask. Please note that signmaking vinyl is generally just a few microns thick and will last many years in normal conditions. Please don't expect real carbon fibre like some idiot did - its vinyl!!